Window & Door Sun Shade Applications
Special Window Shapes
Stop Sun Glare & Block UV Rays

Hard to Cover Windows
Solar Shade for Hard to Cover Windows

Sliding Glass Doors
Sliding Glass Door Solar Shade Screen Panels to Block Sun Glare & UV Rays
SUV Window Shade Screen Panels
Recreation Vehicles
Moterhome and RV Window Shade Screen Panels Block Bright Sunlight and Glare
Water Craft
Custom Boat Window Shade Screen Panels
Need Answers?
Need Help Purchasing?
CALL:  239-463-1664
Customer service hours:
11:00 am - 6:00 pm EST
or email
Overlapping of Frames & Moldings
Sometimes it is desirable to have the solar panel overlap the frame or molding for aesthetic purposes. This can be done if the frame or molding protrudes no further than 3/8" (depending upon the mounting type) outward from the surface of the glass. The chart below shows the mounting types and the maximum frame thickness (extending beyond the surface of the glass) that can be comfortably covered by the solar shade screen panel.
Mounting Type  
Dual Grip Pads 3/16"
Standard 2" Suction Cups 1/4"
Oversize 2.5" Suction Cups 3/8"
Standard placement of the cups or pads is approximately 3/16" from the edge of the solar screen panels. Under "Advanced Features" section on the "Ordering" page, you may request to have the cups or pads set back an additional 1/4" or 1/2" or you may request any distance (in addition to the the 3/16") in the "Remarks" section on the ordering page.
Example Setback of cups or pads:
On a window of 32" x 18" glass measurement with an additional set- back of 1/2" requested, you would order a panel size of 33" x 19". This would allow the panel to overlap the frame by 1/2" on all sides.
In some instances, you may want to overlap only one, two or three sides. Or, you may need other customization. Just order the panel size correctly and let us know your request by one of two methods:
Method #1 Enter simple instructions in the Remarks section on the Ordering page
Method #2 Write "Details to follow" in the Remarks section and then email, fax or postal mail any complex instructions, drawings or templates
For additional information and diagrams on suction cup and pad placement, take a look at: Suction Cups & Dual Grip Pads


Easy Up Shade is a division of ProTect Industries
"Protecting You from the Environment with Technology"
PO BOX 6240, Fort Myers Beach, Florida 33932
Quality Products From
"when you demand the very best . . .
                                             . . . we deliver!"
Glass Block Windows Have You Squinting? Perspiring?
read about our
Solar Shade Panels for Glass Block Windows
Need Solar Screen with Grommet Edges for Hang-in-Place?
Pergola Covers, Patio and Porch Shade, Sliding Shade Curtains, Etc
Links for Information On

 The Easy Up
 System . . .

  Be Sure to View:
      Product Overview
       Frequently Asked 
Skylight Filtering

Reception Areas

BEFORE             AFTER